Spirotech’s sack tipping stations provide flexibility for varying materials content Spirotech-SRD Group offer a range of sack tipping stations to accommodate a variety of powders and granules. The Spirotech-designed and built sack tip stations can be manufactured from mild steel, stainless steel 304 and stainless steel 316.
Read more →
Spirotech-SRD has recently completed a second FIBC big bag discharger for a major hot drinks producer Spirotech’s customer produces a variety of powdered drink products, including ingredients such as cocoa powder, sugar, coffee and malt, for a range of retail customers. Working alongside Spirotech enabled the
Read more →
Spirotech-SRD Group has successfully completed the first stage of the design and manufacture of 24 screw conveyors to be incorporated into a new power station biomass conversion project. Screw conveyors to be incorporated into a new biomass conversion project. The scope of works for the
Read more →
Spirotech-SRD manufacture, supply and install lime storage and handling system for South West Water Following on from Spirotech-SRD Group’s successful service contract with South West Water to maintain its silo lime installations on over thirty sites, Spirotech was successful in winning a contract through one of its
Read more →
Spirotech-SRD Group Ltd install new skimmed milk plant extension to large multinational food company in York. Spirotech-SRD Group Ltd has installed an additional powder handling plant on an existing vessel to expand the capacity of a skimmed milk mixing system. The system was designed in-house by Spirotech’s
Read more →
Spirotech-SRD have recently completed a large vertical oil blending vessel that will shortly be delivered to a major blue chip company based in Hamburg. The vessel was designed and manufactured by Spirotech-SRD at its Cambridgeshire, UK engineering facility. Pictured ready for loading and onward delivery to Germany,
Read more →
Spirotech-SRD Group Ltd has just completed the design and manufacture of a stainless steel/mild steel hybrid silo for handling recycled plasterboard. The largest diameter silo transportable by road The bespoke silo has been designed on what were very demanding parameters, with the silo diameter measuring 4.6m diameter, 4.9m
Read more →
Spirotech SRD Group Ltd has installed two more of its Ground Level Testing Systems at the Anstone site of Forticrete Ltd. The systems have been installed on the two existing silos to protect the vessels before and during tanker discharge.
Read more →
Spirotech-SRD Group has just completed a railed screw conveyor for a renowned Far Eastern chemical company. The Spirotech-designed and manufactured conveyor was produced on a very short lead time in order to meet the client’s site requirements. The railed screw conveyor which is 650mm diameter and 9100mm
Read more →
Spirotech-SRD Group has just completed a further order for ATEX compliant biomass dust screw conveyors. The conveyors, designed to ATEX standards for the handling of biomass dust, are part of essential dust extraction and filtration systems which are being supplied by Spirotech’s customer, a major UK supplier
Read more →
The latest vessel to leave Spirotech-SRD is a 100,000 litre stainless steel water vessel, loaded and on its way for delivery and installation at a major food producer in East Anglia. Spirotech-SRD’s design team and engineers have worked closely with the client to ensure that all elements
Read more →
Spirotech-SRD has recently built and delivered another high-end pressurised screw conveyor for its continuously expanding overseas market. This pressurised screw conveyor is designed to operate at 1.3 bar pressure (nitrogen) and also to contain any internal explosion. It has been designed for a conveying rate of 124
Read more →
Spirotech-SRD’s quad-core centreless screw conveyors, tested and readying for packing for their journey to the Philippines. This is the first two quad-core centreless screw conveyors of four units manufactured in stainless steel for the tobacco industry.
Read more →
A 28000 cubic meter oil blending vessel will shortly be delivered to a major blue chip company based in Belgium. The vessel, PED fully compliant design and fabrication with full third party inspection, was designed and manufactured by Spirotech-SRD at its Cambridgeshire, UK engineering facility. Spirotech-SRD oil
Read more →
The first of four pressure vessels leaves Spirotech-SRD’s factory in Sawtry, Cambridgeshire bound for Bergen in Norway. First of four pressure vessels bound for Norway The bespoke pressured holding tanks are being built under Spirotech’s ‘rapid build’ programme to meet the customers tight deadline on site. The
Read more →
Spirotech-SRD Group Ltd has recently designed, built and delivered three screw feed hopper assemblies for the handling of slightly warm Granola products for a client in Germany.
Read more →
Spirotech-SRD’s latest silo is bound for a building products manufacturer in the Midlands and replaces an existing vessel to give more storage capacity on site. Spirotech-SRD’s on-site installation team have removed the old vessel in readiness for the arrival of the new silo which will be installed
Read more →
Spirotech-SRD Group recently exhibited their latest 400 Series Sludge Dewatering Compactor at the 2105 ADBA (Anaerobic Digestion and Bioresources Association) Exhibition at the NEC in Birmingham.
Read more →
Spirotech has just completed, delivered and installed a second huge silo for a leading paint production company based in the UK. The 120m3 silo assembly, part of a project to replace two smaller silos with larger capacity silos, was manufactured at Spirotech’s main facilities complex in Cambridgeshire
Read more →
Spirotech-SRD have recently completed a stainless steel screw conveyor system for a major UK manufacturer. The machines will be handling various constituent ingredients used in the production of pet treats for a leading pet food manufacturer. This is the second order received by Spirotech-SRD Group Limited for
Read more →
Early March saw the completion of the second of two large pressure vessels designed and built for a prestigious worldwide manufacturer of engine oils and lubricants. The 50,000 litre pressurised holding vessel, for mixing and blending engine oil, was manoeuvred smoothly out of Spirotech-SRD’s manufacturing and build
Read more →
Spirotech-SRD Group’s growing reputation as designers and manufacturers of extra large holding pressure vessels and silos was further enhanced this week by the completion of a 120m3 silo assembly, built to hold mixing ingredients for a paint production company based in the North of England. The huge
Read more →
Spirotech recently designed, built and delivered a 60.000 litre insulated stainless steel energy recovery vessel for a major UK dairy.
Read more →
Spirotech has a strong reputation for high quality design and manufacturing in the bulk handling industry and this was recognised last year when a major oil and gas company placed a £5.5m order for pressurised screw conveyors. High pressure, high temperature tubular screw conveyor To be delivered
Read more →
Working closely with our clients, the Spirotech-SRD Group team has designed and built two 40.000 litre stainless steel pressure vessels under our new ‘rapid build’ program. Our clients approached us with their requirements highlighting the need for the vessels to be delivered within a 5 week critical window.
Read more →
