Sodimate has recently appointed Spirotech Group as its sole UK distributor. Spirotech Group are delighted to announce that with immediate effect the group has been appointed as sole distributor for Sodimate products and spares in the UK. 40 years of experience Sodimate is well known world wide
Read more →
When the Spirotech team were awarded a contract to design, supply, manufacture and install storage silos, mix tanks and screw conveyors for an environmental project in Scotland they knew the deadline was particularly tight. But due to the ‘rapid build’ and installation program that Spirotech deploy for
Read more →
Looking for a great company to join? Spirotech Group has launched a fresh recruitment drive for permanent contracts. Overview We are currently looking for experienced welder fabricators to join our facility based in Sawtry, Cambridgeshire. If you would like to work for a friendly, inclusive and established
Read more →
The town of Thrapston made national news headlines last November when its statue of the silent soldier was vandalised just a few days after Remembrance Sunday. A very disappointed community set about forming a fundraising campaign to replace the statue. However Will Gadsby, Design Engineer at Spirotech
Read more →
Early last year the Spirotech team installed a 50m3 carbon steel silo along with accompanying structures, tank and conveyors as part of a major lime system project for a new energy and recycling facility in Yorkshire. The lime system is now fully commissioned, and is part of
Read more →
Once upon a time all the waste in the world was….well, just wasted. But that was long ago and now all the waste from food, agriculture, plastics, papers, glass and metals can be turned into renewable, ecological energy for heat, fuel, fertilizer and clean water, such as
Read more →
An intensive four week installation at a world leading mineral and china clay processing plant has recently been completed by Spirotech’s installation team, with the plant continuing to operate as normal during the install. The Spirotech designed and built works consisted of a new mild steel silo,
Read more →
The past year has been challenging enough but for Spirotech one project drew on all of its engineers expertise as five 3 ton vessels required craning and lowering underfloor to an excavated site. Replacing and renewing vessels for UK water treatment plants is a regular part of
Read more →
Congratulations are in order for Katie Wood who this week celebrates 21 years at Spirotech. Initially joining the SRD group as an accounts assistant, Katie has risen through the ranks to her directorship position, where various location moves and buy-outs have resulted in the Spirotech Group now
Read more →
The pandemic hasn’t slowed down Spirotech’s output as the waste recycling industry, amongst many essential services, is in constant need of updating and replacing vital machinery to ensure a continuous smooth operation. Currently in progress are Spirotech-designed and manufactured multiple centreless screw conveyors along with two large
Read more →
Why not make your career choice ‘Engineering’? Trained engineers have the skills to design and build the core components behind todays worthwhile engineering projects. Spirotech Group can offer you an exciting opportunity to make your career choice engineering and open up the chance to progress and build
Read more →
Spirotech Group has been actively helping the local community since the first lockdown in March last year and the directors and staff were delighted that they could once again help to make a difference by donating five laptops to Sawtry Junior Academy. Due to the schools being
Read more →
Spirotech Group will be closing over the Christmas break from 13:00 on Thursday 24th December 2020 and will reopen on Monday 4th January 2021 at 8:00. Please note: no deliveries after 16:00 on Wednesday 23rd December 2020. The Directors and staff at Spirotech Group wish all our
Read more →
Spirotech Group has recently designed, manufactured and installed a carbon steel lime slurry storage tank for the UK water industry, used to store pre-mixed lime slurry
Read more →
Spirotech Group feature prominently in one of the latest news outputs from The Leaders Council of Great Britain and Northern Ireland, the knowledge-sharing network that puts leadership in the spotlight and allows inspirational people to receive the recognition they deserve. Spirotech Group Director David Gadsby comments, Spirotech
Read more →
Spirotech has successfully completed a soda ash system upgrade for a leading sugar producer to upgrade its existing effluent treatment plant.
Read more →
Spirotech’s Directors are delighted to have received a commendation from Cambridgeshire County Council’s Chairman for the sterling work the company did during the ongoing Covid-19 crisis.
Read more →
A very worthwhile meeting took place at Spirotech Group’s HQ last week as Spirotech’s Directors welcomed MP Shailesh Vara, County Councillor Simon Bywater, and Police and Crime Commissioner candidate Darryl Preston, for a tour of the design and manufacturing facilities. Spirotech Group is one of the largest
Read more →
Spirotech Group has successfully completed another turnkey lime system upgrade for a UK water authority, the purpose of this particular project being to replace and upgrade the existing lime softening system – a type of water treatment used for water softening which uses the addition of limewater
Read more →
Spirotech Group is delighted to have been awarded a multi-million pound contract by Ovivo to supply twenty trash rack screens as part of the cooling water intake screening system at Hinkley Point C nuclear power station, which is currently under construction in Somerset, UK. Hard work has
Read more →
Latest Spirotech silo installation project Spirotech Group has maintained a strong output throughout these unusual coronavirus times and a recently installed project is a 40m3 capacity storage silo for polymers at a major UK wastewater treatment plant. Spirotech designed and manufactured the silo for the treatment plant
Read more →
A big thank you to all the staff at Spirotech Group for helping the community to stay safe! Spirotech Group’s Director Russell Gadsby relates how Spirotech’s skills are coming into play to help out during these difficult times . “We were approached by the Sawtry Covid19 response
Read more →
To all our valued customers and partners, As COVID-19 continues to impact communities around the country, we want you to know that Spirotech Group remains committed to supporting your business and providing continuity of service even during these exceptional circumstances. At the same time, we are strongly
Read more →
In light of the current situation regarding the COVID-19 pandemic, here is a quick update from us. During this period of uncertainty, we’re here to support you and are fully committed to ensuring all our customers can access our usual high levels of service as normal. Our
Read more →
Spirotech Group has recently completed a full turnkey design, manufacture and installation of a quicklime storage and make up system project for a UK water authority. The 50m3 silo for holding quicklime was designed to transfer the quicklime into a stainless steel sludge mix tank via a
Read more →
Spirotech was commissioned in late 2019 to design, manufacture and deliver a chemical dump tank in early 2020 – a tight timescale given the size, weight and complex design criteria. However, Spirotech’s engineers weren’t phased by this task and rose to the challenge. Rapid build program To
Read more →
Congratulations to Spirotech Group Works Manager Sean Huckle, who has been with the company for 40 years. Starting work as a fledgling engineer (with tea-making featuring prominently in those first few months!) Sean has steadfastly garnered expertise and knowledge of all aspects of the ever-expanding business since
Read more →
Spirotech Group Directors are delighted to announce the winner of the recently held prize draw to win a luxury Christmas Hamper 2019 The winner is: Sid Jone from Ovivo Ltd David Gadsby, MD of Spirotech Group Ltd. commented, Our Christmas Hamper prize draw is always a popular
Read more →
Spirotech Group will be closing over the Christmas break from 1.00pm on Tuesday 24th December 2019 and will reopen on Thursday 2nd January 2020 at 8.00am. Please note: no deliveries after 4.30pm on Monday 23rd December 2019. The Directors and staff at Spirotech Group wish all our
Read more →
The competition is now closed. The winner will be announced shortly – keep checking back! Christmas is just around the corner and the Spirotech Group is delighted to offer you the chance to win this luxury Christmas food and drink hamper by entering the 2019 free prize
Read more →
