Spirotech-SRD Group has just completed a railed screw conveyor for a renowned Far Eastern chemical company. The Spirotech-designed and manufactured conveyor was produced on a very short lead time in order to meet the client’s site requirements. The railed screw conveyor which is 650mm diameter and 9100mm
Read more →
Spirotech-SRD Group is delighted to announce the appointment of Mike Marshall as Group Design and Engineering Manager. Mike Marshall, Group Design and Engineering Manager, Spirotech-SRD Group Mike comes with over 25 years’ experience in the bulk handling sector, designing and managing projects in excess of 5 million.
Read more →
Solve your auger issues! Do you suffer with poor after-sales service and back up on your budget screw conveyors? Do you struggle to get the spares when you need them rather than when the suppliers say you can have them? Do any of the problems below exist
Read more →
Spirotech-SRD Group has just completed a further order for ATEX compliant biomass dust screw conveyors. The conveyors, designed to ATEX standards for the handling of biomass dust, are part of essential dust extraction and filtration systems which are being supplied by Spirotech’s customer, a major UK supplier
Read more →
Spirotech-SRD’s silo maintenance service. It’s often the case that silo and powder handling systems, which tend to be out of sight and out of mind, get neglected in the course of the year where maintenance is concerned. This can lead to unnecessary and expensive production loss, not
Read more →
The latest vessel to leave Spirotech-SRD is a 100,000 litre stainless steel water vessel, loaded and on its way for delivery and installation at a major food producer in East Anglia. Spirotech-SRD’s design team and engineers have worked closely with the client to ensure that all elements
Read more →
Spirotech-SRD has recently built and delivered another high-end pressurised screw conveyor for its continuously expanding overseas market. This pressurised screw conveyor is designed to operate at 1.3 bar pressure (nitrogen) and also to contain any internal explosion. It has been designed for a conveying rate of 124
Read more →
Spirotech-SRD’s quad-core centreless screw conveyors, tested and readying for packing for their journey to the Philippines. This is the first two quad-core centreless screw conveyors of four units manufactured in stainless steel for the tobacco industry.
Read more →
A 28000 cubic meter oil blending vessel will shortly be delivered to a major blue chip company based in Belgium. The vessel, PED fully compliant design and fabrication with full third party inspection, was designed and manufactured by Spirotech-SRD at its Cambridgeshire, UK engineering facility. Spirotech-SRD oil
Read more →
Engineering business Spirotech-SRD Group Ltd has been awarded accreditation from Safecontractor for its commitment to achieving excellence in health and safety. Safecontractor is a leading third party accreditation scheme which recognises very high standards in health and safety management amongst UK contractors. Employing 50 people, Spirotech-SRD Group
Read more →
The Directors and staff at Spirotech-SRD Group are donating to a very worthwhile cause this Christmas. Charity At Christmas is raising money to provide a Festive Christmas Eve Buffet for the homeless, lonely and needy of the Hamptons and the surrounding areas on Christmas Eve. This will
Read more →
The competition has now closed – The winner will be notified shortly. Spirotech-SRD are offering you the chance to win this luxury Christmas food & drink hamper presented in a wicker basket. What better way to embrace the Christmas spirit than with a hamper full of festivity?
Read more →
BULKEX 2015 proved to be well worth attending for Spirotech, generating some solid enquiries for the new canted flight screw conveyor which was being demonstrated on Spirotech’s stand. This is the first time that the MHEA (Materials Handling Engineers Association) has held a combined large-scale national exhibition
Read more →
Spirotech-SRD donned pink to show their support for the national ‘Wear it Pink’ campaign The softer side of steel engineering was on show today as the men and women of Spirotech-SRD all threw off their usual yellow hi-viz and donned pink to show their support for the
Read more →
Spirotech-SRD Group are delighted to announce the appointment of Ben Morgan as Regional Sales Manager who started his new role on 1st October. Ben comes with over 20 years experience in the bulk handling sector working with the majority of blue chip companies in the UK such
Read more →
The first of four pressure vessels leaves Spirotech-SRD’s factory in Sawtry, Cambridgeshire bound for Bergen in Norway. First of four pressure vessels bound for Norway The bespoke pressured holding tanks are being built under Spirotech’s ‘rapid build’ programme to meet the customers tight deadline on site. The
Read more →
Spirotech-SRD Group Ltd has recently designed, built and delivered three screw feed hopper assemblies for the handling of slightly warm Granola products for a client in Germany.
Read more →
Don’t miss Spirotech-SRD on Stand No. 18 at this year’s BULKEX Exhibition showcasing our GLT (Ground Level Silo) safety system, small flight assemblies and Mix S.r.l. range of products.
Read more →
Spirotech-SRD’s Service, Maintenance and Spares division offer a full spares and preventative maintenance programme for your bulk handling, screw conveyor and storage equipment. In addition, Spirotech’s engineers offer a 24-hour repair service to all conveying equipment, silos, dischargers and all associated material-handling systems and can supply critical
Read more →
Spirotech – SRD Group Ltd are pleased to invite you to our Head Office & manufacturing facility in Cambridgeshire for an informal Open Day in September 2015. The Open Days will give you an insight into our products and capacity which we are sure will be a
Read more →
Despite a very wet summer Sunday our MotoGP ticket winner had a great day… I had an absolutely fabulous day thanks to you and Spirotech!! It was a damp start but turned out drier until the Moto GP race was about to start! It then rained
Read more →
Spirotech-SRD’s latest silo is bound for a building products manufacturer in the Midlands and replaces an existing vessel to give more storage capacity on site. Spirotech-SRD’s on-site installation team have removed the old vessel in readiness for the arrival of the new silo which will be installed
Read more →
A big thanks to all our entrants of the prize draw to win two tickets for the 2015 MotoGP next Sunday 30th August. The lucky winner is…
Read more →
Spirotech-SRD Group recently exhibited their latest 400 Series Sludge Dewatering Compactor at the 2105 ADBA (Anaerobic Digestion and Bioresources Association) Exhibition at the NEC in Birmingham.
Read more →
The 2015 British Grand Prix MotoGP™is back at Silverstone and Spirotech-SRD have two Grandstand tickets for one lucky entrant into their latest prize draw. The competition has now closed – The winner will be notified on 24th August 2015. There’s nothing quite as exciting as being in
Read more →
Spirotech-SRD is delighted to announce that the winner of the recently run F1 prize draw is
Read more →
Spirotech has just completed, delivered and installed a second huge silo for a leading paint production company based in the UK. The 120m3 silo assembly, part of a project to replace two smaller silos with larger capacity silos, was manufactured at Spirotech’s main facilities complex in Cambridgeshire
Read more →
Spirotech-SRD have recently completed a stainless steel screw conveyor system for a major UK manufacturer. The machines will be handling various constituent ingredients used in the production of pet treats for a leading pet food manufacturer. This is the second order received by Spirotech-SRD Group Limited for
Read more →
The prize draw is now closed. Watch this space for announcement of the winner! Enter our prize draw to win 2 tickets for this year’s F1 Grand Prix at Silverstone on 5th July. Spirotech-SRD are offering you the chance to win 2 tickets for the 2015 F1
Read more →
Early March saw the completion of the second of two large pressure vessels designed and built for a prestigious worldwide manufacturer of engine oils and lubricants. The 50,000 litre pressurised holding vessel, for mixing and blending engine oil, was manoeuvred smoothly out of Spirotech-SRD’s manufacturing and build
Read more →
